Welcome to my blog

Im exploring aspects of mehndi,designs,techniques,significance,function and historical background. I incorporate patterns that are either modern and traditional,Indian or Arabic into contemporary jewellery.





Showing posts with label casting. Show all posts
Showing posts with label casting. Show all posts

15 August 2012

matt wax gun and batik tool

figure 1

figure 1 shows paisley patterns made using the batik tool on the right with injecting and beeswax mixture and the left shows the matt wax gun with blue wax.
figure 2
figure 2 shows the close up of figure 1 that was done using the batik tool. What im tying to do is make the pattern more 3 dimensional by turning them over and making blobs on the other side.

figure 3

figure 4
figure 3 and 4 shows the patterns that are flat on the back and raised on the front.

figure 5


figure 6

figure 5 and 6 shows the detail both on the front and the back of the elements.

figure 7

figure 7 are patterns made using 3 different waxes with the matt wax gun. I started with the blue,then the red and then the green. I found the red and green wax works the best when the gun is on medium heat the blue wax needs to be used at a higher tempreture as opposed to the green and red wax.

wax elements with batik tool

figure 1




figure 2

figure 3

figure 1,2,3 shows the tree built with the moulded elements
figure 4

figure 5

figure 6

figure 4,5,6 shows the casted elements linked together making a beautiful chain

draped head accessory

figure 1

figure 2

Initially when I design this head piece, the main idea was for the elements to look like chain. Figure 1 and 2 shows the initial design of the elements.

 figure 3

figure 3 shows the elements that were made by forging wire and soldering balls together with a jumpring at the ends as to attach to each other. These were all made individually by hand and no casting included,this was taking a long time to make. The connection between the two elements were quite weak because there were to many solder joints.

figure 4

figure 4 shows a different element that might work better. I want to use the batik wax tool to draw the pattern so that it is delicate and detailed.
figure 5

figure 5 shows the final element that im going to attempt drawing with the batik tool

14 August 2012

mehndi and diamate tiara

figure 1
i used a graver to engrave lines to fill in the spaces that looked bare as shown in figure 1, im engraving lines that cross over

figure 2

figure 3

figure 4

figure 5

figure 2,3,4,5 show the finish piece from different angles,trying to show detail and the diamates that have been stuck

07 August 2012

cast mehndi elements for head piece

figure 1

now that the domed flowers for the diamante stones are done(figure 1),need to cast the other elements and clean them.
figure 2
 figure 2 and 3 shows the mould that i had made earlier using 1 master element that i spent one entire day piercing and filing round,sanded,polised than made a mould off.


figure 3

figure 4
 figure 4 shows the tree off elements that have just been casted and is now being cut off one at a time.

figure 5
the elements are being cleaned in sulphuric acid (figure 5)
figure 6
 figure 6 shows some of the elements that have been sanded and polished.

figure 7

figure 7 shows the arrangement of elements in the correct sequence for the bridal head piece

02 August 2012

bridal head accessory

this was a picture given to me by my cousin who is getting married and wants two bridal head pieces. she also asked if i could add my mehndi touch to i and tweak it so that it looks like its mehndi-like.
these were my designs.

some patterns were of Roome's were similar to that of the picture reference given to me by my cousin
Roome 1998:36

Roome 1998:39

Roome 1998:44

Roome 1998:47

using wax rolling worked well for these small elements

i aslo spend one entire day piercing this one element and filing it and sanding it to make it perfect so that i could make a mould of them and cast.


and my hand pieced flowers. lloks like everything is slowly coming together.